VAPOUR HEADER DIA FOR PAN SECTION    
S.No Description Value UOM  
1 Crushing Rate TCH  
2 A m/c % cane
home:
Take percentage of m/c boiled on that particular vapour (Ex: If we boiled 50% m/c on 2nd vapour than calculating the 2nd vapour header take 50% m/c value on total m/c percent)
%  
3 B m/c % cane
home:
Take percentage of m/c boiled on that particular vapour (Ex: If we boiled 100% m/c on 3rd vapour than calculating the 2nd vapour header take value zero here)
%  
4 C m/c % cane
home:
Take percentage of m/c boiled on that particular vapour (Ex: If we boiled 100% m/c on 2nd vapour than calculating the 3rd vapour header take value zero here)
%  
5 Temperature of input vapour oC  
6 Velocity of input vapour m/sec  
7 Specific steam consumption for A massecuite (Take maximum requirement) Ton of vapour/ ton of massecuite  
8 Specific steam consumption for B massecuite (Take maximum requirement) Ton of vapour/ ton of massecuite  
9 Specific steam consumption for C massecuite (Take maximum requirement) Ton of vapour/ ton of massecuite  
10 Specific volume of Pan inlet vapour  M3/kg  
Result  
  Dia of the vapour Header
home:
Taken 10% extra on required vapour
 mm  
  Say mm